Debrand your phone (Change Product Code)
Page 1 of 1
Debrand your phone (Change Product Code)
Guide debrand your phone (Do this at your own risk, You may damage your phone).
Debrand your S60v3 & S60V5
Do the following but make sure u have the latest Nokia PC Suite installed as this has the usb drivers...
1. Download Nemesis Service Suite
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
2. Download Nokia Software Updater
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
3. Connect your phone and wait for Windows to detecting it.
4. Open Nemesis Service Suite and click “Scan for new device” on the right-upper part of the window
5. Click on the icon “Phone info”
6. Click on “Scan”
7. Change the product code to and mark the case “Enable”.
8. Press “Write”, and your phone’s product code will be changed (you might think that nothing happened, because the phone is still in normal mode, and the changing of the product code only takes a couple of seconds, but don’t worry, the product code changed !).
9. Close Nemesis Service Suite and run the Nokia Software Update.
10. Make sure not to touch the cable or the phone while your phone is updating or else you will break it!
Debrand your Nokia 5800 (S60v5)
Do the following but make sure u have the latest Nokia PC Suite installed as this has the 5800 usb drivers...
1. Download JAF 1.98.62
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
2. Download JAF PKEY Emulator v5.0
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
3. Install JAF 1.98.62
4. Extract JAF PKEY Emulator v5.0 to desktop
5. connect ur Nokia 5800 and select PC Suite mode on your Nokia 5800.
6. Now run JAF PKEY v5.0 and click on the GO button. It will come up with error: box driver not installed --> so click ok and now JAF v1.98 will run.
7. select BB5 tab --> tick Prod. Manager --> then click the service button --> click the Read Values button.
8. Now u can enter ur product code and press the Write Values button and boooom it all done.
Get product codes here
Language Packs
EURO1 - English, French, German, Italian, Spanish, Portuguese
EURO2 - English, French, German, Turkish, Dutch, Italian
EURO3 - English, Czech, Slovakian, German, Polish, Hungarian
Scandinavia - English, Finnish, Swedish, Norwegian, Icelandic, Danish
Baltic - English, German, Estonian, Russian, Latvian, Lithuanian
Russia - English, German, Ukrainian, Russian, Romanian, Bulgarian, Hungarian
Balkans - English, German, Croatian, Slovenian, Serbian, Greek
Arabic - English, Arabic, French, Farsi, Urdu
Hebrew - English, Hebrew, Arabian, Russian, Romanian, Spanish
Africa - English, Portuguese, German, Italian, French
Debrand your S60v3 & S60V5
Do the following but make sure u have the latest Nokia PC Suite installed as this has the usb drivers...
1. Download Nemesis Service Suite
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
2. Download Nokia Software Updater
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
3. Connect your phone and wait for Windows to detecting it.
4. Open Nemesis Service Suite and click “Scan for new device” on the right-upper part of the window
5. Click on the icon “Phone info”
6. Click on “Scan”
7. Change the product code to and mark the case “Enable”.
8. Press “Write”, and your phone’s product code will be changed (you might think that nothing happened, because the phone is still in normal mode, and the changing of the product code only takes a couple of seconds, but don’t worry, the product code changed !).
9. Close Nemesis Service Suite and run the Nokia Software Update.
10. Make sure not to touch the cable or the phone while your phone is updating or else you will break it!
Debrand your Nokia 5800 (S60v5)
Do the following but make sure u have the latest Nokia PC Suite installed as this has the 5800 usb drivers...
1. Download JAF 1.98.62
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
2. Download JAF PKEY Emulator v5.0
https://nokia-magikk.board-directory.net/all-about-flashing-and-firmware-f15/tools-for-firmware-updating-and-product-code-switching-t4.htm
3. Install JAF 1.98.62
4. Extract JAF PKEY Emulator v5.0 to desktop
5. connect ur Nokia 5800 and select PC Suite mode on your Nokia 5800.
6. Now run JAF PKEY v5.0 and click on the GO button. It will come up with error: box driver not installed --> so click ok and now JAF v1.98 will run.
7. select BB5 tab --> tick Prod. Manager --> then click the service button --> click the Read Values button.
8. Now u can enter ur product code and press the Write Values button and boooom it all done.
Get product codes here
Language Packs
EURO1 - English, French, German, Italian, Spanish, Portuguese
EURO2 - English, French, German, Turkish, Dutch, Italian
EURO3 - English, Czech, Slovakian, German, Polish, Hungarian
Scandinavia - English, Finnish, Swedish, Norwegian, Icelandic, Danish
Baltic - English, German, Estonian, Russian, Latvian, Lithuanian
Russia - English, German, Ukrainian, Russian, Romanian, Bulgarian, Hungarian
Balkans - English, German, Croatian, Slovenian, Serbian, Greek
Arabic - English, Arabic, French, Farsi, Urdu
Hebrew - English, Hebrew, Arabian, Russian, Romanian, Spanish
Africa - English, Portuguese, German, Italian, French
Similar topics
» Change Product Code on Nokia 5800 using JAF
» Tools for firmware updating and product code switching !!!
» Tools for firmware updating and product code switching !!!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|